Shower Waterproofing in Adelaide

What Is Shower Waterproofing?

Shower waterproofing involves applying a continuous waterproof membrane to the shower recess floor and walls to prevent water from penetrating the building envelope. Showers are the most water-intensive area in any home, and in Adelaide, AS 3740-2021 mandates that all shower areas be waterproofed to specific heights and standards. A properly waterproofed shower prevents leaks, mould, and structural damage that can cost thousands to repair.

When Do You Need Shower Waterproofing?

We connect you with licensed waterproofers when:

• You are installing a new shower or renovating an existing one
• Your shower is leaking through to the floor below or adjacent rooms
• Grout is cracking, tiles are loose, or silicone has deteriorated
• You can see or smell mould in or around the shower area
• The shower base feels spongy or moves when stepped on

Methods and Materials

Licensed waterproofers in Adelaide use a range of proven methods for shower waterproofing:

• Liquid polyurethane membrane (most common for showers)
• Sheet membrane with welded seams
• Cementitious tanking for shower recesses
• Shower hob and niche waterproofing
• Over-tile waterproofing systems for re-sealing

Shower Waterproofing Cost in Adelaide

Costs vary based on size, condition, access, and the membrane system used. Here are typical Adelaide price ranges:

Typical rate: $65 – $130 per m²

Want a detailed cost breakdown? See our full Shower Waterproofing cost guide.

AS 3740-2021 Requirements

In Adelaide, shower waterproofing is regulated under Australian Standard AS 3740-2021. This standard sets out the mandatory requirements for waterproofing wet areas in domestic and commercial buildings. Key requirements include:

• Waterproofing must be applied by a licensed waterproofer
• Membranes must meet minimum thickness and continuity requirements
• A flood test must be conducted before any tiling work begins
• A compliance certificate must be issued upon completion

Learn more in our complete AS 3740-2021 guide.

The Shower Waterproofing Process

When we connect you with a licensed waterproofer in Adelaide, here is the typical process they follow:

1. 1Remove existing tiles and inspect substrate condition
2. 2Repair any damaged or degraded substrate material
3. 3Install shower hob (minimum 25mm above finished floor level)
4. 4Prime substrate and apply bond breaker at junctions
5. 5Apply flashing tape to internal corners and penetrations
6. 6First coat of liquid membrane to shower floor and walls (to 1.8m minimum)
7. 7Second coat applied after appropriate drying time
8. 8Waterproof shower niche and any recesses
9. 9Conduct 24-hour flood test
10. 10Issue compliance certificate and proceed to tiling

Why Choose Licensed Waterproofers

We only connect you with licensed, insured waterproofing professionals in Adelaide. Here is why that matters:

• Shower waterproofing failures are the #1 source of water damage claims in Australian homes
• AS 3740-2021 specifies minimum membrane heights for shower walls (1.8m)
• Licensed applicators understand critical details like hob heights and fall requirements
• Insurance claims may be denied if waterproofing was not done by a licensed professional
• A compliance certificate protects your investment and adds value at sale